Free Service Call
With Completed RepairCall now
Repairing your microwave may sometimes look like a huge task. However, there are several easy tips on San Diego Dacor Microwave Repair that you can use to fix any faulty electronic device. The repairs usually take less than 15 minutes to complete. Use the following guide to carry out Dacor microwave repair:
First, before you do your microwave repair, you should start by discharging the capacitor. A microwave that isn't functioning well and has power removed from the power connection over a lengthy period must have a single discharge resistor in circuit. You can quickly locate the capacitor, which is in the backside lower end of the oven. In some cases, the capacitor is roofed or enclosed by a plastic covering.
Step 1: Disengage the power code and take out any movable sections in your oven ahead of fixing anything.
Step 2: Lift the back cover pane of your microwave. Locate the 2 screws found on the right edge and one screw on the left edge. Using an ordinary screwdriver, remove all the screws. You should also find the four screws on the back of your microwave. Use a screwdriver to remove them.
Step 3: Once you have opened the back cover, assess the fuse in the first place. By using a resistor tester, check whether the fuse is broken. Replace any broken fuse with a new one.
Step 4: Carry out a thorough inspection of the switches of the door. Typically, there are three switches in your oven and you should check each of them keenly. First, press the pin at the side of the switch and spin it to get rid of the switch. Inspect the breakers one by one and identify the ones that are different from the others. A faulty switch may fail to produce the click when the button is pressed. You may also determine the defective switch if the plastic is burnt.
Step 5: Examine the interiors of the switch by pressing the button downwards. If the contacts cannot be connected, then the switch is broken. Change all the broken switches with new ones.
Step 6: Buy the right replacement part for all the faulty parts of your oven, including door switches. Before you make your purchase, ensure you get the right brand name and model number. Technicians from San Diego Dacor Microwave Repair have all parts needed for your appliances.
Step 7: You need to as well establish that the door hooks are correctly engaging the switch actuator when you push the door. In case there is an issue, you need to make the necessary adjustments and, where appropriate, replace the faulty parts with new ones.
Step 8: Once you get the right replacement parts, then you should install the new switches to get your microwave in perfect working condition once again. Install the switches properly.
Once you are done your San Diego Dacor Microwave Repair, return the back covering by screwing it in place. You should also put back any movable parts. Then switch it on to establish whether it is functioning properly. If it fails to work, call our San Diego Dacor Microwave Repair.