Dacor Oven Repair Service San Diego

Free Service Call

With Completed Repair

Call now

$25 Off Labor

With Any Appliance Repair Services

Call now

( votes average 0.0 out of 5 )

San Diego Dacor Refrigerator Repair

Certified Dacor Oven Repair 

An oven is an essential electronic device mostly found in your kitchen. It is convenient in preparation for your daily meals and can give you a chance to continue with your busy schedule without much hustle. That is why you have no choice, but to know the steps of fixing an oven that fails to work.  The following are our essential tips on San Diego Dacor Oven Repair.

Issue 1: The Gas Burner won't light

  • Open the burner grate, base, and cap and asses it for dirt or dust.
  • Clean the entire burner structure thoroughly. Eliminate food particles, which often build up.
  • Dust the grate, cap, as well as the case thoroughly.
  • Assess the wiring system linking the igniting system to the controlling component. Look out for loose wires. If there is one, fix it.
  • If it still doesn't ignite, change the igniter.

Issue 2: Your oven can’t heat

A defective ignition component may show that your oven has malfunctioned. Change the defective igniter by doing the following:

  • Even ahead of doing a Dacor oven repair, start by switching off the power supply;
  • To access the igniter, take away the grill or storage component;
  • You still will reach the igniter from below the oven. With a screwdriver, extract the defective igniter;
  • Change the defective igniter;
  • If the heating element is the concealed type, ask a professional from San Diego Dacor Oven Repair to change it.
San Diego Dacor Freezer Repair

Warranty Offered Appliance Repair Near Me

Issue 3: The Oven is not heating to the Required Temperature

This defect is possibly caused by a malfunctioned temperature sensor, or gas igniter. Do the following to address the issue:

  • Observe the temperature sensor. Make sure that it is not contacting the interiors of the oven;
  • Apply an ohmmeter to find out if the sensor is functioning;
  • Change the sensor if it isn't working;
  • Establish if the gas ignition component is functional. If not, change it;
  • Once you have observed and adjusted everything, readjust your oven. Then heat it to 180° C. After twenty minutes have lapsed, determine the interior temperature with a functional and standard thermometer. Keep monitoring the temperature every twenty minutes for subsequent 2 hours. Record the findings;
  • Add the total temperature reading obtained. Find the mean of the temperature by dividing the total amount by the readings;
  • From the amount you acquire, modify the oven's temperature accordingly.

Issue 4: The Oven Door won't shut

If you will follow these rules that San Diego Dacor Oven Repair made for you, your appliance will always be in a good working condition. A door that doesn’t shut exposes you to safety issues.

  • In case your oven type is gas, detach it from the gas source and stop the flow of the gas;
  • Raise the door from the oven or undo the hinges to get a good view of the door in the inside parts of the oven;
  • Scrutinize the hinges and change them in case they are malfunctioned or are defective;
  • Study the door springs as well. Using a pair of pliers, get rid of broken springs and change them and put back the ones that are in shape;
  • Change the rubber gasket that are found at the door as well;
  • In case the door cannot shut at this point, remove the sensor and put back one that is in proper shape.